People kept asking me for these and I have been hesitant to since I do ‘free shipping’ for everything on my site and these are done on a per order custom basis.\u00a0 I also only shipping via UPS or USPS with tracking.\u00a0 So I decided that I would do them for $30 each.\u00a0 Please don’t ask me what length you need for your exact configuration.\u00a0 To figure this out, I recommend that you put your buffer in your buffer tube without the spring.\u00a0 Then with your carrier in your hand, insert it into the buffer tube and if you need a spacer, you will see that the key of your carrier is hitting your lower.\u00a0 Insert quarters into your buffer tube till the key no longer hits your lower.\u00a0 Measure all the quarters and then tell me what length you need or tell me how many quarters you put in your tube to stop the key from impacting.\u00a0 I will make to that length and the shoulder will be included in that length.\u00a0 Remember that if you are using a hydraulic or magnetic buffer that you must compress the ‘plunger’ to determine this.<\/p>\n","protected":false},"excerpt":{"rendered":"
People kept asking me for these and I have been hesitant to since I do ‘free shipping’ for everything on my site and these are done on a per order custom basis.\u00a0 I also only shipping via UPS or USPS with tracking.\u00a0 So I decided that I would do them for $30 each.\u00a0 Please don’t …<\/p>\n